These posts are manufactured the same as our Aluminum screw posts, then a hard anodize coating is added to produce a black color. These posts are ideal for uses where an enhanced appearance is desirable, yet the strength of aluminum posts is required.
The post length is 1/2" and the diameter is 3/16". The post length is the maximum binding thickness (inside length.) We recommend that you measure your document to obtain the best fit. If necessary, ... [More]
Our 7/8 inch inside diameter clear Plastic Snap Rings have an a easy to use one piece snap closure design. Simply press closed for hanging of signs from wire fixtures or to make light weight sample swatches. Sold in packages of 100.
1/4" Aluminum Screw Post Extensions are anodized in a Antique Brass color to make your project a little old fashioned. They are used for extending the length of our aluminum screw posts. The post length is 1/4". Post length is the length that the extension will add to the screw post it is assembled with. The diameter of the post is 3/16" with a thread size of #8/32. This will work with any post as long as the diameter and thread size match. They come in packs of 100. If ... [More]
Plastic screw posts are molded Delrin and Polyethelene. Posts have a large head at one end and a hole at the other. A large-headed screw snaps into the hole on the post, allowing for rapid assembly.
The post length is 1/8" and the diameter is 0.24". The post length is the maximum binding thickness (inside length.) We recommend that you measure your document to obtain the best fit. Plastic screw ... [More]
2" Antique Brass Aluminum screw posts are anodized with a strong coating that will last a long time. The post is 2" in length and has a 3/16" diameter. They are sold in sets with a male and female end and a thread size of #8/32. Antique Brass aluminum posts are great for binding books, making scrapbooks larger, holding together swatches and so many more projects. With the Antique Brass finish it just gives your project that little extra boost it needs to look great.
1/2" Aluminum Screw Posts are Anodized with a hard coating making them an Antique Brass color. The post length is 1/2" and the diameter is 3/16". This is no including the head of the post or the screw. Post and screw heads are 7/16" diameter and 1/16" thick. The screw thread is #8-32. These posts come with a 3/8" long screw. We recommend that you measure your document to obtain the best fit. These posts are the industry standard size. They are compatible with ... [More]
Plastic screw posts are molded Delrin and Polyethelene posts having a large head at one end and a hole at the other. A large-headed screw snaps into the hole on the post, allowing for rapid assembly. Plastic screw posts may be easily unscrewed to remove or add pages.
The post length is 1½" and the diameter is 0.24". The post length is the maximum binding thickness (inside length.) We ... [More]
Plastic screw posts are molded Delrin and Polyethelene posts having a large head at one end and a hole at the other. A large-headed screw snaps into the hole on the post, allowing for rapid assembly. Plastic screw posts may be easily unscrewed to remove or add pages.
The post length is 2" and the diameter is 0.24". The post length is the maximum binding thickness (inside length.) We recommend ... [More]
6" aluminum screw posts are CURRENTLY OUT OF STOCK. They are designed for binding very large books. For books and other projects that require a longer post, they can also be extended to almost any length with our screw post extensions. For binding documents this thick, it's a good idea to obtain posts that are slightly longer than the thickness of the book. This will leave room to open the inner pages a bit better, and ... [More]
1/2" Aluminum screw posts have many uses. Designed for binding documents, they are also commonly used for connecting leather parts in cases, straps, holsters, tack, and more. Our 1/2" screw posts will securely fasten 4 or 5 thicknesses of 8-10 ounce leather. For maximum strength, the post should be long enough to go all the way through all of the pieces when they are assembled. Making the hole a snug fit for the parts will also increase the strength of the connection.
